Comments on: Attansic L1 Gigabit Ethernet driver for Debian

By: Viorel

Viorel — Tue, 03 Feb 2009 13:07:49 +0000

It doesn’t work.
I’ve tried to run insmod /tmp/atl1.ko but I get the error: “Invalid module format”
MB: Asus P5L

Thank you.

By: Csongor Varga

Csongor Varga — Mon, 19 Jan 2009 11:06:51 +0000

Sorry, it doesn’t work for me. When I try during installation, it works perfectly, ifconfig shows the interface, connects to the DHCP server. lspci shows ‘unknown device’, but it works. After installation there is nothing just loopback. eth0 is a firewire and insmod doesn’t work. Same problem that Ivan said: “Invalid module format”. MB: P5K
Any idea?

By: Andres

Andres — Sat, 17 Jan 2009 14:04:16 +0000

Gracias Javier

Desde Brasil, muchas gracias.

By: Dan Mitchell

Dan Mitchell — Sun, 22 Jun 2008 20:10:57 +0000

mucho gracias…

I built a new computer yesterday with an ASUS P5KPL-VM MB, and ran into the same problem. Downloaded the driver from your link, ran insmod, and immediately got a connection. :)

By: Russell Nelson

Russell Nelson — Wed, 11 Jun 2008 18:10:29 +0000

Does anybody have a binary for 2.6.18-6-486? Debian Etch has upgraded the kernel and changed a structure in an incompatible way.

By: alecs

alecs — Sat, 26 Apr 2008 01:59:18 +0000

Torsten, when you insert the usb cockroache, the syslog says that yours is usb 2-1 but actually your hardware will be directed to some scsi like device, for example in my case it directs me to the sdb device. So if I want to mount this I need to do a

mount -t vfat /dev/sdb1 mnt

just read all the lines after you insert the usb. :)

By: links for 2008-04-01 « Caiwangqin’s delicious bog

links for 2008-04-01 « Caiwangqin’s delicious bog — Tue, 01 Apr 2008 23:31:52 +0000

[...] Attansic L1 Gigabit Ethernet driver for Debian » javier arturo rodríguez » Blog Archive (tags: debian network drivers) [...]

By: prodanov

prodanov — Thu, 27 Mar 2008 20:10:41 +0000

Thnx so much Javier! I’m moving from HP notebook to an ASUS one and ur hint saved me a overnight. Thnx also to Willem that explained step by step how to load the module during installation.

By: Dan

Dan — Wed, 27 Feb 2008 07:25:53 +0000

Many thanks Javier. I also bought an M2V mainboard and i was almost ready to install another network controller as the given driver source did not easily compiled. I used the version of David with studio64. It works but i still have many message on the console that says something like “disables raw interrupts”, any clue ?

By: Czuber

Czuber — Fri, 21 Dec 2007 21:16:37 +0000

I’m sorry, but this command failed:

$ objcopy -R .modinfo atl1.ko

The command doesn’t exists. I installed only the basic system. What .deb I need to execute this command? Is that correct?

I don’t know what to do anymore to! :’(